Factors affecting the quality of silicone products
🕙 2023-07-12 👆
Factors affecting the quality of silicone products
Silicone products as environmentally friendly, non-toxic and harmless products, are widely used in the world, strong market demand has spawned a large number of silicone products factory, large and small silicone plants all over the region, quality is the life of the factory, so how to control the quality of silicone products factory?
In this era of looking at the level of appearance, silicone products factory is the same, the workshop environment is the level of appearance, clean and dust-free workshop is the basic guarantee of quality, because the adsorption of silicone is very strong, do not pay attention to the product on the dust, become defective products. Secondly, production staff should also change into dustproof clothing.
The second is the quality inspection in the production process, the quality inspection personnel should go through strict training before the job, after passing the assessment, they can independently complete the quality inspection operation. The quality control management personnel should give the quality control personnel clear quality standards, and the way to deal with the problem, and record the problem in writing, and the solution.
We silicone products factory, quality of survival, quality of development, to quality to benefit. 10 years of professional silicone products experience. One-stop service, to ensure customer satisfaction is to strictly control the quality of silicone products. If a silicone products factory does not have quality, there is no market. Silicone products quality control is not good, will lose the trust of customers, will be gradually eliminated by peers, abandoned by customers, lost the source of profits and the ability to survive.
First of all, we regularly hold staff quality awareness training, so that employees understand what is quality, what is high quality, instill the importance of quality for the enterprise, and cultivate quality awareness. In addition to training, our factory has also formulated corresponding rules and regulations to strengthen the supervision and management of the factory.
In fact, training alone is not enough, but also to develop relevant rules and regulations to supervise the implementation. Employees must adhere to the three No's principle. Here is the silicone sleeve to explain.
1. Do not accept defective silicone sleeve products: Before entering the next process, we must refuse to accept defective products in the previous process (establish customer concept between processes) - mutual inspection.
2. Do not manufacture defective silicone sleeve products: in each manufacturing process, it is necessary to manufacture products that meet the specifications/requirements according to the regulations - self-test.
3. No outflow of defective silicone sleeve products: refers to self-inspection and mutual inspection in the manufacturing process to prevent the outflow of defective products. - Special inspection.
Establish a professional quality inspection department, comprehensively supervise the production of each process, and prevent silicone products such as silicone sleeves from flowing into the hands of customers. Our company's own research and development of 6 quality control procedures can determine the silica gel product yield of more than 99%.
How to judge the quality of silicone products
In order to obtain the trust of customers for a long time, the quality of silicone products must be guaranteed, so how to judge the quality of silicone products? Our factory can provide customers with high-quality silicone products for a long time, long-term export to Japan, South Korea and Europe and the United States and other countries. So how exactly is this done?
1. Whether the raw edge of the product is rough to touch, the size of the closing line determines the mold work of the product, the mold work determines the overall effect of the product, and the self-removing wire is very important!
2, the vulcanization effect of the product, feel the uneven hardness and softness of the product, poor tensile rebound strength and poor rebound effect, related to the manufacturer's vulcanization time and raw materials.
3, color and smell, the color of silicone products uniform deployment depends on the manufacturer in the mixing process of mixing uniformity, the longer the color saturation is better.
4, silicone raw materials are non-toxic and tasteless, but the raw materials in the addition of vulcanization agent in the process of high temperature oil pressure molding of silicone manufacturers will appear a little rubber taste, but after two sulfurization and long-term placement will gradually disappear! So no smell is normal!
For the silicone material to judge whether a supplier can get the basic requirements, basically can be judged from the above points, of course, want to choose a quality supplier or need to understand from many aspects, processing products, the strength and qualification of the manufacturer is naturally very important!
Previous：A detailed introduction to con